Mobile hydraulic hose service
Hose burst? We make the new one where the machine stands.
The Mr. Crimp van carries hose, fittings and a crimping machine. Send your location pin and a photo of both hose ends, and the new assembly is crimped and fitted on the spot.
Not sure the van can reach you? Call it and it tells you whether it can come now.

- Send your pinYour location pin and a photo of both hose ends, on WhatsApp.
- We confirm the hoseWe check the hose and fittings from your photos and load the van.
- The van drives to youStraight to the machine, with the parts on board.
- Crimped and fittedThe new assembly is made and fitted on the spot.
How a call-out works
From a photo on WhatsApp to a new hose on the machine
Most of the work happens before the van arrives. Your photos tell us the hose, its size and both fittings, so the van comes loaded with the right parts.
- One number for calls and WhatsApp: 052 913 4285
- A new assembly made to match the old one
- Crimped and fitted where the machine stands




Made to match
A new assembly, matched to the old hose
The van makes the new hose assembly from the old hose, or from its size and fittings. Hose fittings are crimped onto the hose ends with a ferrule; straight, 45 degree and 90 degree ends and a range of thread forms match the ports on your machine.
On the van
- Hydraulic hose
- Hose fittings and adaptors
- A crimping machine
What to send
Five things that get the right hose back first time
A few photos and a measurement, sent at once, are what get the right hose made. Read the full guide
- Your location pinShare it on WhatsApp so the van comes straight to the machine.
- Photos of both hose endsClose photos of each fitting: straight, 45 or 90 degree, the thread and any marks on it.
- The print on the hoseThe layline usually gives the maker, the standard and the size. Photograph it, even if it is worn.
- The lengthLay the old hose straight and measure end to end, fittings included.
- The machine and which hoseFor example: excavator, bucket ram. Say if it runs on anything but standard hydraulic oil.
- Send it all in one messagePin, photos and length together get the van moving soonest.
Safety first
Before you photograph the hose
A burst hose can still be under pressure. Make the machine safe first, then send the photos.
- Stop the machine and lower anything the hydraulics are holding up.
- Release the pressure in the circuit the way the machine's manual says.
- Never feel for a leak with your hand. A pinhole jet of oil under pressure can go through skin, and that needs a doctor at once.
Backed by the Steeloid showroom. Mr. Crimp is the mobile hose service of Steeloid Industrial Supplies, the stockist behind Ajman Car Souq in Al Jurf Industrial Area 1. For hose fittings and adaptors over the counter, visit the showroom.
Visit SteeloidWhat should I send?
Your location pin and a photo of both hose ends. If you can read the size and the fittings, send those too. All of it goes on WhatsApp to 052 913 4285.
Can you match an old hose?
Yes. The van makes the new assembly from the old hose, or from its size and fittings.
Do you only do hydraulic hose?
Ask the van. Call 052 913 4285 and say what the hose carries and where it fits.
Can the van reach me now?
Call the van on 052 913 4285 and it tells you whether it can come now.
Is Mr. Crimp part of Steeloid?
Yes. Mr. Crimp is the mobile hose service of Steeloid Industrial Supplies in Al Jurf, Ajman, and 052 913 4285 is also the Steeloid showroom's mobile and WhatsApp number.